#Trendnet ip camera viewer software
#Trendnet ip camera viewer password
#Trendnet ip camera viewer plus

I opened a help desk ticket with Trendnet and their suggested url was: I had already tried this one with channel 1 and 2 and with and without the user and password in the url and it did not work in Icamsource. If I use the user:password and hit start, for most attemps, it doesn't error, but does not produce an image. I'm at work right now and can't try it to get the exact wording. I have found that if I don't use the user and password in the beginning of the url, I get the error that the camera cannot be found. They look exactly alike and the specs appear to be the same. I have also tried video url's that I found on the web for Hikvision IP cameras as the Trendnet camera is a rebranded Hikvision DS-2CD2012-I. The main channel is H.264 and cannot be changed. I also tried most of the links separatly in Icamsource with and without a user name and pasword: I have also tried links with a channel designation as '1' and I also tried it with a '2' as the MJPEG is the substream. I tried all 68 links that come up at the link, none produce an image. I also use a 10' piece of 1' PVC with a duster stuck in the end and use it to wipe stuff off of the cams/windows when something gets on them. I sprayed bug/spider spray around the area of the camera, IR illuminator and around the outside of the windows where my other cameras point outside from inside of the house. I bought a sub-$10 IR illuminator and mounted it about 5' below the camera and adjusted it in the center of the camera view and is working good. I blanked off the IR LED's with aluminum tape with duct tape over that and left a cutout for the day/night sensor. The camera is mounted under the eave of my house. Any help would be appreciated.įYI.The IR illumination on this camera works pretty good, except that bugs and spiders are attracted to it. One reason I bought this camera was because it was compatable with MJPEG. I have also tried changing a '1' to a '2' for channel designation for some of the video url's since it is a substream. I have tried them with and without a loging:password in the http string.

#Trendnet ip camera viewer plus

I have tried all of the known video url's on SKJM's website plus all of the ones I found online and cannot get an image to show on icamsource. My goal is to get Icamsource to see the MJPEG image so that I can add an outdoor Trendnet camera to my remote location and run it from home like I do the remote Airlink cameras. I have been using a separate session of Icamsource (different password) so I don't have to keep stopping/starting my primary Icamsource. I have the substream set to MJPEG, 640x480 and 2fps. The Trendnet camera uses H.264 video as its mainstream and has a substream that is selectable for H.264 OR MJPEG. Icamsource is running with 2 local webcams and 1 Airlink IP camera and 3 Airlink IP cameras at a remote location.

#Trendnet ip camera viewer software

The camera's main stream is H.264 and I am using that format with Trendnet's ProView software running on a dedicated computer that I also use for Icamsource. Coldest temps I saw this past winter was -24*F. Recently purchased a Trendnet TV-IP320PI outdoor camera as it is rated to -20*F and can use POE.